Main Products
- Phosphonates Antiscalants, Corrosion
Inhibitors and Chelating Agents -
- Amino Trimethylene Phosphonic Acid (ATMP)
- 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP)
- 2-Phosphonobutane -1,2,4-Tricarboxylic Acid (PBTC)
- Diethylene Triamine Penta (Methylene Phosphonic Acid) (DTPMPA)
- 2-Hydroxy Phosphonoacetic Acid (HPAA)
- Polyamino Polyether Methylene Phosphonic Acid(PAPEMP)
- More
- Salts of Phosphonates
-
- Tetra Sodium Salt of Amino Trimethylene Phosphonic Acid (ATMP•Na4)
- Penta sodium salt of Amino Trimethylene Phosphonic Acid (ATMP•Na5)
- N-oxide, Pentapotassium Salt of Amino Trimethylene Phosphonic Acid (ATMP-N-Oxide)
- Disodium Salt of 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP•Na2)
- Tetra Sodium Salt of 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP•Na4)
- 2-Phosphonobutane -1,2,4-Tricarboxylic Acid, Sodium salt (PBTC•Na4)
- More
- Polycarboxylic Antiscalant and Dispersant
- Biocide and Algicide
- Reverse Osmosis Chemicals
-
- KR-0100 Antiscalant and Dispersant for RO Membrane
- KR-150 Antiscalant and Dispersant for RO Membrane
- KR-200 Antiscalant and Dispersant for RO Membrane
- KR-191 Antiscalant and Dispersant for RO Membrane
- KRASD-200 Antiscalant and Dispersant for RO Membrane
- KR-260 Acid Detergent for RO Membrane
- KR-261 Alkali Detergent for RO Membrane
- More
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
-
- KR-907 Non-P Scale & Corrosion Inhibitor
- KR-503 Scale and Corrosion Inhibitor for Boiler
- KR-503B Scale and Corrosion Inhibitor for Boiler
- KR-504 Scale and Corrosion Inhibitor for Heating Water
- KR-601 Scale and Corrosion Inhibitor for Iron & Steel Plant
- KR-604 Scale and Corrosion Inhibitor for Power Plant
- More
- Corrosion Inhibitors & Oxygen Scavenger
- Surfactant & Others
- Detergent Auxiliary
Shandong Kairui Chemistry Co.,Ltd.
TEL: +86-632-3671188
FAX: +86-632-3671189
E-mail: export@krchemical.com
ADD: No.1, Fuqian South Road, Xuecheng Chemical Industrial Park, Xuecheng District, Zaozhuang City, Shandong Province, China
Sodium Diethylhexyl Sulfosuccinate
Synonyms: Penetrant OT, Penetrating agent T CAS NO.: 1639-66-3
Molecular formula: C20H37NaO7S Molecular weight: 444.56
Structural Formula:
Properties:
This product is an anionic surfactant, it has properties of rapid penetration, homogeneity, wetting, emulsification and better frothing. It is intolerant with strong acid, strong alkali, heavy metals and reductant.
This product is soluble in water, lower alcohol, benzene, ccl4 and kerosene oil solvents. The solution is milk white, pH (1% water solution) is 6.5±0.5.
This product can penetrate rapidly and homogeneously, and has good effect at temperature lower than 40℃ and pH 5-10. The treated fabric is stable even temperature acidic and alklic condition changed. It’s widely used textile & dyeing, pesticide emulsification, tanning and mineral separation.
Specification:
Items | Index |
---|---|
Appearance | Colorless or yellowish liquid |
pH (1% water solution) | 6.5±0.5 |
Penetrating(1% water solution) | ≤5s |
Solid content, % | 50±2 |
Methods and used in
(1) Cotton wool dyeing: 2g/l of this product is heated from room temperature to 95℃, 20 min dehydration, then rolling drift after cooling, cleaning, dechloridation.
(2) Cotton wool lian drift: cotton wool is pretreated at 20℃ for 5 min, then other additives can be added, it is heated to 80-90℃ in 20-30 min, and is treated for 45 min. When cotton shell is removed, it can be dyed. The preferred dosage is 2-3g/l.
(3) Cotton wool lian, drift and dyeing: The direct or active dye which is oxidant tolerance is selected. The method is the same as 2, dyeing is added directly.
(4) Scouring of adhesive: addition of penetrant t in scouring of adhesive can reduce 2 h and decrease damage to silk.
(5) Usage in asbestos: for froth asbestos, the preferred dosage is 10-15% of asbestos; for dustless asbestos, the preferred dosage is 15-20% of asbestos.
(6) Usage in tanning: for dry tanning, this product is usually mixed with jfc, and the preferred dosage is 0.5-1.0%. For tanning additives, the preferred dosage is 10%.
Package and Storage:
Package: 200L plastic drum,IBC(1000L),customers’ requirement.
Shelf life: two years.
Attentions
(1) This product should better be used under 40℃ for silk, it can decomposed in high temperature and alkali. Thus, it is first treated with silk under 40℃, then it is heated. For asbestos, it is first pulped into slurry with asbestos, then it is heated to 200-300℃.
(2) This product is intolerant with strong alkali. Diluted with water first.
(3) This product is anionic surfactant, it cannot mixed with cationic surfactant or cationic dye.
(4) The slurry should better be cleaned in lian drift in order to guarantee its effect.
(5) If too many froth is occurred, antifrother such as octanol, tributyl phosphate can be used.